Encore electronic ENM232-6VIA user manual Feature Highlights, System Requirements

Feature Highlights

zFull-duplex 6CH DAC/2CH ADC

zSupports 96K/24 bit playback; 48K/16 bit recording

zPCI Rev. 2.2 compliant with bus mastering modes

zSupports the latest Dolby® Digital EX and DTS ES 5.1 CH DVD soundtrack playback

zDirectSoundTM 3 HW acceleration

zZoomed Video Port Support

zACPI compliant power down management

System Requirements

zIntel® Celeron 350MHz or AMD® K6II 500MHz or better

z128MB RAM or better

zCD-ROM Drive

zWindows® 98SE, Me, 2000, XP, Windows Vista™

zDirectX™ 8.1 or above required

Installing driver on Windows® 98SE/ME/2000/XP/ Windows Vista™

1.Locate an available PCI slot on your computer, and insert the ENM232-6VIA 5.1 Channel Sound Card into the slot. Fasten the card to the case using a screw;

2.Turn computer power on. Windows® will detect the Sound Card as “PCI Multimedia Audio Device” or “Multimedia Audio Controller” device. Click “Cancel” button. We recommend to use the sound card setup utility instead of Windows at this time.

3.Place the Setup disc CD into the CD-ROM drive. Click the Start button on the taskbar and click Run. Type “D:\autorun.exe”. (assuming D: is your CDROM drive letter)

4.Follow the on-screen instructions to complete the utility software installation

5.When installation is finished, restart your computer