Enerco HST45 Technical Specifications, Side View End View, Heater Specifications, Length

Technical Specifications:

	Length
111/2"	1" Max.
	Reflector
Burner Box	Suspension Points
	Heat
	Exchanger

131/2 "

9"

- Side View -

- End View -

	Leading Particulars
Model No.	BTU/hr	Weight	Length
MHT- 45	45,000	96 lbs.	10’
HST- 45	45,000	96 lbs.	10’

HEATER SPECIFICATIONS

Electrical

Rating: 120VAC, 60Hz, single phase, 1 amp

Connection: 3 pin molded plug

Gas Inlet Connection

Connection ½” Male NPT

Gas Inlet Pressure

The minimum inlet gas supply pressure for the purpose of input adjustment.

Natural Gas:

Minimum - Inlet 5.0” w.c.

Maximum - Inlet 10.5” w.c.

LP Gas (propane):

Minimum - Inlet 11.0” w.c.

Maximum – Inlet 13.0” w.c.

Manifold Pressure

Natural Gas: 4.0” w.c.

LP Gas (propane): 10.0” w.c.

VENTING SPECIFICATIONS

Vent/Flue

Length – 25 feet (Maximum) 5 feet (Minimum)

Flue Pipe – 3.0” diameter

Vent Pipe – 3” diameter

Enerco Group, Inc., Gas-Fired Low-Intensity Infrared Heater 5 Operating Instructions and Owner’s Manual