ODOR FADE WARNING

WARNING

Asphyxiation Hazard

•Do not use this heater for heating human living quarters.

•Do not use in unventilated areas.

•The flow of combustion and ventilation air must not be obstructed.

•Proper ventilation air must be provided to support the combustion air requirements of the heater being used.

•Refer to the specification section of the heater’s manual, heater dataplate, or contact the Factory to determine combustion air ventilation requirements of the heater.

•Lack of proper ventilation air will lead to improper combustion.

•Improper combustion can lead to carbon monoxide poisoning leading to serious injury or death. Symptom of carbon monoxide poisoning can include headaches dizziness and difficulty in breathing.

FUEL GAS ODOR

LP gas and natural gas have man-made odorants added specifically for detection of fuel gas leaks.

If a gas leak occurs you should be able to smell the fuel gas. Since Propane (LP) is heavier than air you should smell for the gas odor low to the floor. ANY GAS ODOR IS YOUR SIGNAL TO GO INTO IMMEDIATE ACTION!

•Do not take any action that could ignite the fuel gas. Do not operate any electrical switches. Do not pull any power supply or extension cords. Do not light matches or any other source of flame. Do not use your telephone.

•Get everyone out of the building and away from the area immediately.

•Close all propane (LP) gas tank or cylinder fuel supply valves, or the main fuel supply valve located at the meter if you use natural gas.

•Propane (LP) gas is heavier than air and may settle in low areas. When you have reason to suspect a propane leak, keep out of all low areas.

•Use your neighbor’s phone and call your fuel gas supplier and your fire department. Do not re-enter the building or area.

•Stay out of the building and away from the area until declared safe by the firefighters and your fuel gas supplier.

•FINALLY, let the fuel gas service person and the firefighters check for escaped gas. Have them air out the building and area before you return. Properly trained service people must repair any leaks, check for further leakages, and then relight the appliance for you.

ODOR FADING - NO ODOR DETECTED

•Some people cannot smell well. Some people cannot smell the odor of the man-made chemical added to propane (LP) or natural gas. You must determine if you can smell the odorant in these fuel gases.

•Learn to recognize the odor of propane (LP) gas and natural gas. Local propane (LP) gas dealers will be more than happy to give you a scratch and sniff pamphlet. Use it to become familiar with the fuel gas odor.

•Smoking can decrease your ability to smell. Being around an

odor for a period of time can affect your sensitivity to that particular odor. Odors present in animal confinement buildings can mask fuel gas odor.

•The odorant in propane (LP) gas and natural gas is colorless and the intensity of its odor can fade under some circumstances.

•If there is an underground leak, the movement of gas through the soil can filter the odorant.

•Propane (LP) gas odor may differ in intensity at different levels. Since Propane (LP) gas is heavier than air, there may be more odor at lower levels.

•Always be sensitive to the slightest gas odor. If you continue to detect any gas odor, no matter how small, treat it as a serious leak. Immediately go into action as discussed previously.

ATTENTION - CRITICAL POINTS TO REMEMBER!

•Propane (LP) gas has a distinctive odor. Learn to recognize these odors. (Reference Fuel Gas Odor and Odor Fading sections above.

•Even If you are not properly trained in the service and repair of the heater, ALWAYS be consciously aware of the odors of propane (LP) gas and natural gas.

•If you have not been properly trained in repair and service of propane (LP) gas then do not attempt to light heater, perform service or repairs, or make any adjustments to the heater on the propane (LP) gas fuel system.

•A periodic sniff test around the heater or at the heater’s joints; i.e. hose, connections, etc., is a good safety practice under any conditions. If you smell even a small amount of gas, CONTACT YOUR FUEL GAS SUPPLIER IMMEDIATELY. DO NOT WAIT!

Mr. Heater Forced-Air Propane Construction Heater

4

Operating Instructions and Owner’s Manual

Page 3 Page 5
Page 4
Image 4
Enerco MH170FAVT owner manual Odor Fade Warning, Fuel GAS Odor, Odor Fading no Odor Detected
Page 3 Page 5

MH170FAVT specifications

The Enerco MH170FAVT is a high-performance portable propane heater designed for both indoor and outdoor applications. This versatile heater stands out with its impressive heating capacity, efficient operation, and user-friendly features, making it an ideal choice for numerous environments such as workshops, garages, construction sites, and even during outdoor events.

One of the primary features of the MH170FAVT is its powerful heating output, capable of delivering up to 170,000 BTUs. This significant heating capacity ensures that areas of up to 4,200 square feet can be effectively warmed, providing comfort in large spaces efficiently and quickly. The heater utilizes propane, a clean-burning fuel that not only contributes to a lower environmental footprint but also minimizes fuel costs over time.

The design of the Enerco MH170FAVT emphasizes portability and practicality. It is equipped with a durable metal housing that ensures robustness and longevity. The large, rugged wheels make it easy to transport the heater from one location to another, while the convenient carrying handle enhances its maneuverability.

This heater is also designed with safety in mind. It includes a built-in safety tip-over switch that automatically shuts off the heater if it tips over, preventing potential hazards. Additionally, the MH170FAVT features an adjustable heat level control that allows users to customize their heating needs quickly.

Furthermore, the heater incorporates a reliable ignition system that ensures quick starts, allowing users to heat their spaces without the fuss of complicated setups. The unit is also compatible with standard 20 lb propane tanks, making fuel replacement hassle-free and convenient.

The Enerco MH170FAVT's efficiency is complemented by its robust thermal output, ensuring that users can experience sustained warmth without excessive fuel consumption. Its thoughtful engineering and design not only enhance performance but also create an overall user-friendly experience.

Whether for industrial applications or recreational use, the Enerco MH170FAVT is a powerful and efficient heating solution that meets diverse heating demands. Its blend of safety, convenience, and portability allows it to stand out in the market, making it a trusted choice for anyone in need of reliable heating in various settings.
Top Page Image Contents