INSTALLATION

Venting Introduction

This pellet stove operates on a negative draft system, which pulls combustion air through the burn pot and pushes the exhaust air to the vent pipe and out of the building. This unit must be installed in accordance with the following detailed descriptions of venting techniques; not installing the stove in accordance with the details listed here can result in poor stove performance, property damage, bodily injury or death. England’s Stove Works is not responsible for any damage incurred due to a poor or unsafe installation.

If questions arise pertaining to the safe installation of the stove, our customer service line (800-245-6489) is available. Contact your local code official to be certain your installation meets local and national fire codes and if you’re uncertain about how to safely install the stove, we recommend contacting a local NFI certified installer to perform the installation.

Venting Guidelines

•ALWAYS install vent pipe in strict adherence with the instructions and clearances included with your venting system.

•DO NOT connect this pellet stove to a chimney flue which also serves another appliance.

•DO NOT install a flue pipe damper or any other restrictive device in the exhaust venting system of this unit.

•ONLY use chimney liners listed for pellet appliance venting; do not use galvanized or B-Vent pipe.

•INSTALL a block-off plate in the throat of the fireplace opening.

•SEAL each joint of pellet vent with high temperature silicone (Part # AC- RTV3) to prevent smoke spillage into the home.

•AVOID excessive horizontal runs and elbows, as both will reduce the draft of the venting system and will result in poor stove performance.

•INCLUDE as much vertical pipe as possible to prevent smoke from the unit from entering your home in the event of a power outage.

•INSPECT your venting system often to be certain it is clear of fly-ash and other restrictions.

•CLEAN your venting system as detailed in the maintenance section of this manual.

WARNING: Venting system surfaces get HOT, and can cause burns if

touched. Noncombustible shielding or guards may be required.

Page 10

Page 9 Page 11
Page 10
Image 10
England's Stove Works 25-EPI operation manual Installation
Page 9 Page 11

25-EPI specifications

England's Stove Works has been a trusted name in home heating for over three decades, offering a range of high-quality stoves and heaters designed to deliver efficient warmth with exceptional craftsmanship. The 25-EPI model stands out for its blend of innovative technology, functional design, and aesthetic appeal.

The England's Stove Works 25-EPI operates primarily on pellet fuel, a renewable and environmentally friendly energy source. This model is equipped with a robust 45,000 BTU output, making it a powerful choice for heating spaces of up to 2,200 square feet. Its high efficiency translates into significant cost savings on heating bills, making it a practical investment for homeowners.

One of the significant features of the 25-EPI is the large, stainless steel hopper with a capacity of 55 pounds. This hopper allows for extended burn times, meaning it can keep the home warm for longer periods without frequent refueling. The user-friendly control panel simplifies operation, allowing users to adjust the temperature and heating settings effortlessly.

The 25-EPI is designed with a unique airflow system that ensures an even distribution of warmth throughout the space. This system not only enhances efficiency but also ensures a consistent, comfortable indoor climate. Additionally, the built-in combustion blower helps maintain optimal airflow, promoting cleaner burning and maximizing energy efficiency.

Safety is paramount in the design of the 25-EPI. It features a thermal overload protector and a safety shut-off function, providing peace of mind for users. The stove also boasts an easy-to-clean system, ensuring that maintenance is straightforward and hassle-free.

In terms of aesthetics, the 25-EPI blends practical design with a classic look. Its sleek, modern appearance fits well in various home decors, making it an attractive addition to any living space. The durable steel construction provides longevity, reflecting the quality craftsmanship that England's Stove Works is known for.

In summary, the England's Stove Works 25-EPI is a versatile and efficient heating solution, ideal for homeowners looking to reduce their carbon footprint while enjoying the warmth of a pellet stove. With its powerful output, extended burn times, and user-friendly features, it represents an excellent choice for both performance and style in home heating.
Top Page Image Contents