England's Stove Works 25-EPI operation manual Thermostat Operation

THERMOSTAT OPERATION

Thermostat Operation Details

•The 25-EP was designed to operate equally well in both manual and thermostat mode. While using the control board for heating control gives the user control over the heat output of the stove, the thermostat allows the stove to “start-up” and “shutdown” independently which will help maintain your house at a more constant temperature and save pellet fuel.

•The 25-EP can be connected to either a wall thermostat (Part # GU-1E30- 914) or wireless remote thermostat (Part # AC-3001). Although either thermostat will operate the stove properly, we highly recommend the wireless thermostat for the convenience of starting your pellet stove from anywhere in the house.

•During thermostatic operation, the stove will burn at whatever heat range and blower speed the control board has been set to.

•When the call for heat is gone (i.e. the room is up to temperature), the stove will enter the thermostatic shutdown sequence.

•If, during the shutdown period, the call for heat returns, the stove will complete the shutdown cycle before relighting.

•Remember to locate the thermostat near the stove in a central location; putting the thermostat in a distant room can cause the stove to overheat the room it’s located in because the thermostat will only sense the temperature of the room in which it is installed.

•Although all heat range and blower speed settings are available in thermostat mode, the two settings specifically designed for thermostat mode are heat ranges 3 and 8.

oHeat range 3 is intended for thermostat operation under normal operating conditions.

oHeat range 8 is ideal for thermostat operation in large or poorly insulated homes.

Page 21