The SmartSwitch 2000 Chassis View
2-30 Managing the Hub
those ports allows you to both view and set that port’s available modes. All
100Base-TX Fast Ethernet ports can be configured to operate in either standard
Ethernet (10 Mbps) or Fast Ethernet (100 Mbps) mode, and in each mode can be
configured to operate in Full Duplex, effectively doubling the available wire
speed (from 10 to 20 Mbps in standard Ethernet mode, or from 100 to 200 Mbps in
Fast Ethernet mode); 100Base-FX (fiber) ports can be configured to operate in their
standard 100 Mbps mode, or in full duplex mode. This window also displays the
mode currently in effect on the selected interface, and provides some information
(where it is available) about the interface’s link partner.
To access the Fast Ethernet Configuration Window:
1. From the Chassis View, click to select the Fast Ethernet port you wish to
configure; the Port Menu will display.
2. Click on Configuration. The Fast Ethernet Configuration window,
Figure 2-13, opens.
To access the Fast Ethernet Configuration window on SmartSwitch 2000 Ethernet
MicroLAN Switches:
1. From the Chassis View, click on Device in the menu bar to access the Device
menu.
2. Click Bridge Status. In the resulting window click on the Bridge Port button
(e.g., ) to access the Bridge Port menu.
3. Click Configuration. The Fast Ethernet Configuration window, Figure 2-13,
opens.
Figure2-13. The Fast Ethernet Port Configuration Window