Enterasys Networks C1H124-48, C1H124-24 manual Installing the Device

Installing the Device

4. Grasp the sides of the Mini-GBIC and pull it straight out of the port slot .

If storing or shipping the Mini-GBIC, insert the dust protector into the Mini-GBIC to protect the fiber ports.

3.4INSTALLING THE DEVICE

For a tabletop or shelf installation, locate the device within seven feet of its power source and on an unrestricted free surface area as shown in Figure 3-3. If an optional redundant power system is going to be installed and connected to the D-type cable connector on the rear of the device, refer to the installation guide shipped with the redundant power system.

Proceed to Section 3.4.3 for power connection instructions.

CAUTION: To ensure proper ventilation and prevent overheating, leave a minimum clearance space of 5.1 cm (2.0 in.) at the left, right, and rear of the device.

Figure 3-3 Clearance Required for Tabletop or Shelf Installation

D

A

C1H124-48

B

A = 15 cm (4 in.)

B = 57 cm (22.5 in.) C = 53 cm (21 in.) D = 213 cm (7 ft)

C

3831_01_03

Hardware Installation 3-5