Connecting to the Network

Figure 3-13 Cable Connection to LC Multimode Fiber-Optic Connectors

À

522

 

50

 

51

49

1

 

CPU RPS

49 50

51 52

1

2

Á

Ã

Â

 

3831_01_14

Mini-GBIC LC port connector shown on C1H124-48

Release tab

MT-RJ cable connector

Link/Activity LED

 

 

3.Plug the other end of the cable into the appropriate port on the other device. Some cables may be terminated at the other end with two separate connectors, one for each fiber-optic strand. In this case, ensure that the transmit fiber-optic strand is connected to the receive port and the receive fiber-optic strand to the transmit port.

4. Verify that a link exists by checking that the port Link/Activity LED is on (blinking green or solid green). If the Link/Activity LED is off, perform the following steps until it is on:

a.Verify that the device at the other end of the segment is ON and connected to the segment.

b.If there are separate fiber-optic connections on the other device, check the crossover of the cables. Swap the cable connections if necessary.

c.Check that the fiber-optic connection meets the dB loss and cable specifications outlined in the Cabling Guide for multimode mode cabling. To obtain this document, refer to “Related Documents” in About This Guide.

If a link has not been established, refer to Chapter 4 for LED troubleshooting details. If a problem persists, refer to Section 1.12 for details on contacting Enterasys Networks for support.

5.Repeat steps 1 through 3, above, until all connections have been made.

3-16Hardware Installation

Page 44
Image 44
Enterasys Networks C1H124-24, C1H124-48 manual Cable Connection to LC Multimode Fiber-Optic Connectors

C1H124-24, C1H124-48 specifications

Enterasys Networks, a prominent player in the field of networking technology, has developed a range of innovative solutions tailored for modern enterprise demands. Among their offerings are the C1H124-48 and C1H124-24 switches, both designed to facilitate robust connectivity and superior network performance.

The Enterasys C1H124-48 is a 48-port Ethernet switch, designed to meet the needs of dense network environments. It supports a variety of Ethernet standards, making it versatile for different deployment scenarios. This model boasts advanced Layer 2 switching capabilities, ensuring that data packets are efficiently managed and routed within local networks. With support for Power over Ethernet (PoE), this switch can supply power to connected devices, such as IP phones and wireless access points, without the need for separate electrical wiring.

Conversely, the C1H124-24 is a 24-port variant that shares many features with its larger counterpart. It is ideal for smaller office environments or as part of a larger stack in complex installations. Both models support high throughput rates to handle heavy data traffic, ensuring seamless connectivity and minimal latency for end-users.

One of the key strengths of both switches is their integration of advanced security features. They support features such as VLAN tagging and Access Control Lists (ACLs), allowing network administrators to segment traffic and enforce strict security protocols. This is essential for protecting sensitive data and ensuring compliance with industry regulations.

In addition to security, the C1H124 models utilize cutting-edge technologies such as Quality of Service (QoS) to prioritize critical network applications, ensuring that bandwidth-intensive tasks like video conferencing and cloud applications receive the necessary resources. This capability is vital in modern enterprises where operational continuity depends on reliable network performance.

Additionally, Enterasys Networks emphasizes ease of management with both models. They come equipped with intuitive management interfaces and support for network management protocols, allowing for straightforward monitoring and configuration. This reduces the administrative burden on IT staff and enhances operational efficiency.

In summary, the Enterasys Networks C1H124-48 and C1H124-24 switches are well-engineered solutions that cater to a variety of networking needs. With their comprehensive feature set, including PoE support, advanced security, QoS, and user-friendly management, they are positioned to enhance network performance and security in diverse organizational settings. The decision to adopt these switches can lead to significant improvements in connectivity and overall network efficiency.