Enterasys Networks manual Rack Mounting the Chassis, 2 Fastening the C2RPS-CHAS2 to the Rack

Installing C2RPS-CHAS2 into the Rack

Caution: To ensure proper ventilation and prevent overheating, leave a minimum clearance space of 10.16 cm (4.0 in.) at the front and rear of the N-POE Chassis.

Precaución: Para asegurar una buena ventilación y evitar que el sistema se sobrecaliente, deje un espacio mínimo de 10.16 cm (4 pulgadas.) con respecto a la parte delantera y trasera del chasis N- POE.

Warning: Before installing the chassis into a rack, ensure that the rack can support the device(s) without compromising the stability of the rack. Otherwise, personal injury and/or equipment damage may result.

Advertencia: Antes de instalar el chassis en un rack, asegurarse que el rack puede soportar el(los) dispositivo(s) sin comprometer la estabilidad del mismo. De otra forma puede suceder algun tipo de daño personal o del equipo.

Warnhinweis: Schützen Sie sich vor Verletzungen und Geräteschaden, überzeugen Sie sich vor der Installation des Chassis in das Rack, von dessen Stabilität.

Rack Mounting the Chassis

Refer to Figure 2‐2 and proceed as follows to install the chassis into a 19‐inch (48.3‐cm) rack:

1.Position the chassis between the vertical frame members and align the mounting holes in the chassis brackets with those in the rack frame.

2.Fasten the chassis securely to the frame using four mounting screws (user‐supplied).

Figure 2-2 Fastening the C2RPS-CHAS2 to the Rack

C2RPS-CHAS2

C2RPS-PSM

Power

 À Â

ÁÁ

1 C2RPS-CHAS2 chassis with one PSM 3 Mounting screws (supplied by user)

2Rails of 19-inch rack

SecureStack C2 Installation Guide 2-5