Enterasys Networks D-Series Introduction

Enterasys D-Series CLI Reference 1-1
1
Introduction
ThischapterprovidesanoverviewoftheD‐Series’suniquefeaturesandfunctionality,an
overviewofthetasksthatmaybeaccomplishedusingtheCLIinterface,anoverviewofwaysto
managetheswitch,factorydefaultsettings,andinformationabouthowtousetheCommandLine
Interfacetoconfiguretheswitch.
D-Series CLI Overview
TheEnterasysNetworksD‐SeriesCLIinterfaceallowsyoutoperformavarietyofnetwork
managementtasks,includingthefollowing:
•UseCLIcommandstoperformnetworkmanagementandswitchconfigurationoperations.
• Downloadanewfirmwareimage.
• AssignIPaddressandsubnetmask.
•Selectadefaultgateway.
•EstablishandmanageVirtualLocalAreaNetworks(VLANs).
•Establishandmanagepolicyprofilesandclassifications.
•Establishandmanagepriorityclassification.
• Configuresecurityprotocols,including802.1XandRADIUS,SSHv2,PWA,MAClocking,and
MACauthentication.
Switch Management Methods
TheD‐Seriesswitchcanbemanagedusingthefollowingmethods:
•LocallyusingaVTtypeterminalconnectedtotheconsoleport.
• RemotelyusingaVTtypeterminalconnectedthroughamodem.
• RemotelyusinganSNMPmanagementstation.
•In‐bandthroughaTelne tconnection.
•In‐bandusingtheEnterasysNetSight®managementapplication.
For information about... Refer to page...
D-Series CLI Overview 1-1
Switch Management Methods 1-1
Factory Default Settings 1-2
Using the Command Line Interface 1-5