Enterasys Networks XSR-Series manual Table of Contents

Table of Contents		page
1.0	IP-Address and Secondary Addresses configuration	4
1.1	IP-Static-routing	4
1.2	IP-Loopback Interface	4
1.3	IP-OSPF-routing	5
1.4	IP-RIPv1,v2-routing	6
1.5	DHCP server, static / dynamic-pool	7
1.6	DHCP/Bootp relay argent / ip-helper	7
1.7	SNTP Simple Network Time Protocol	8
2.0	Interface description	9
2.1	Duplex configuration on Fast Ethernet full/half	9
2.2	Speed configuration on Fast Ethernet 10/100MBit/s	9
2.3	System login banner	9
3.0	Access control list incoming outgoing	10
3.1	Access control list 1-99 (standard)	10
3.2	Access control list 100-199 (extended)	10
3.3	Access control list moving online editing	11
4.0	Virtual Router Redundancy Protocol (RFC 2338)	12
4.1	VRRP monitor interface function, interface tracking	13
4.2	NAT static bindings	14
4.3	NAT dynamic with PAT “Port Address Translation”	14
5.0	Dialer Interface	15
5.1	Dialer Backup interface function	16
5.2	PAP for authentication PPP	17
5.3	CHAP for authentication PPP	18
5.4.1 VPN via Dialer Interface rtr1		19
5.4.2 VPN via Dialer Interface rtr2		20
5.5.1 Dialer Int. PRI to BRI with D-channel-callbackcentral-site		21
5.5.2 Dialer Int. PRI to BRI with D-channel-callbackremote1-site		22
5.5.3 Dialer Int. PRI to BRI with D-channel-callbackremote2-site		23
6.1	ISDN switch type changing	24
6.2	ISDN callback	25
6.3	ISDN multilink / ISND channel bundling	26
7.0	PPPoE on Fast Ethernet interfaces	27
7.1	IP-address negotiation for PPPoE	27
7.2	PPPoE on ADSL interface with chap authentication	27
8.0	AAA Authentication Authorization Accounting Radius	28
8.1	SSH / Telnet	29
8.2	SYSLOG function, Server local-buffer	29
8.3	SNMP configuration /contact/location/parameter	30
8.4	SNMP v1/v2/v3	30
Configuration Guide		Page 2 of 55