B1.0 show ip route | Enterasys Networks XSR-Series specification

B1.0 show ip route

XSR-1805#show ip			route
Codes: C-connected, S-static, R-RIP, O-OSPF, IA-OSPF						interarea
	N1	- OSPF	NSSA external type 1, N2 - OSPF NSSA external type 2
	E1	- 0SPF	external type 1,		E2 - 0SPF external	type 2
	* - candidate default, D -				default route originated from default net
C	192.168.224.0/24			[0001]	directly connected, FastEthernet2
* S	0.0.0.0/0			[0001]	via 192.168.224.1,	FastEthernet2

XSR-1805#

B1.1 show ip arp

XSR-1805#show ip arp

Protocol	Address Age(min)		Hardware Address Type Interface
Internet	192.168.224.11	-	00a0.c9c8.004f	ARPA	FastEthernet2
Internet	192.168.224.132	-	0001.f425.c2b2	ARPA	FastEthernet2

XSR-1805#

B1. show ip interface

XSR-1805#show ip interface

FastEthernet1 is Admin Up

Internet address is 10.10.10.1, subnet mask is 255.255.255.0 Rcvd: 0 octets, 0 unicast packets,

0 discards, 0 errors, 0 unknown protocol. Sent: 0 octets, 0 unicast packets,

0 discards, 0 errors. MTU is 1500 bytes.

Proxy ARP is disabled.

Helper address is not set.

Directed broadcast is enabled.

Outgoing access list is not set.

Inbound access list is not set.

Router discovery is disabled.

FastEthernet2 is Admin Up

Internet address is 192.168.224.132, subnet mask is 255.255.255.0 Rcvd: 8932656 octets, 5900 unicast packets,

0 discards, 0 errors, 5472 unknown protocol. Sent: 177264 octets, 3272 unicast packets,

0 discards, 0 errors. MTU is 1500 bytes.

Proxy ARP is enabled.

Helper address is not set.

Directed broadcast is enabled.

Outgoing access list is not set.

Inbound access list is not set.

Router discovery is disabled.

XSR-1805#

Configuration Guide

Page 47 of 55

Image 47

Enterasys Networks XSR-Series manual B1.0 show ip route, B1.1 show ip arp

Contents

Configuration Guide Table of Contents Appendix Helpful commands for using the XSR platform IP-Static-routing IP-Loopback Interface IP-Address and Secondary Addresses configuration IP-OSPF-routing IP-RIPv1,v2-routing Ip local pool 10th 10.10.10.0 Sntp Simple Network Time Protocol Duplex half System login bannerDuplex full Configuration Guide XSR-1805config#access-list 110 move 1 Access control list moving online editing Hostname XSR-18051 Router-2-BackupVirtual Router Redundancy Protocol RFC Router-1-Master Vrrp 1 priority Vrrp 1 master-respond-ping no shutdown Vrrp monitor interface function, interface tracking Ip address 10.10.10.1 255.255.255.0 no shutdown Access-list 10 permit 10.10.10.0NAT static bindings NAT dynamic with PAT Port Address Translation Dialer Interface Controller e1 0/2/0 clock source internal no shutdown Dialer Backup interface function Username remote privilege 0 password is not displayed PAP for authentication PPP Interface Dialer0 dialer pool Chap for authentication PPPUsername remote privilege 0 cleartext iamRemote Dialer-list 1 protocol ip list XSR-1805-1config#aaa user XSR-1805-1config-aaa#password XSRVPN via Dialer Interface rtr1 VPN via Dialer Interface rtr2 Dialer Int. PRI to BRI with D-channel-callbackcentral-site Ppp pap sent-username central password xsr ppp multilink Dialer Int. PRI to BRI with D-channel-callbackremote1-site Ppp pap sent-username remote1 password xsr1 ppp multilink Dialer Int. PRI to BRI with D-channel-callbackremote2-site Ppp pap sent-username remote2 password xsr2 ppp multilink Isdn config for BRIx/x Isdn switch type changing Dialer-group Isdn callbackDialer caller 112233 callback dialer remote-name XSR-Remote Isdn multilink / Isnd channel bundling PPPoE on Adsl interface with chap authentication AAA Authentication Authorization Accounting Radius Logging Snmp Medium Ip ssh server disable Ip telnet server disableSSH / Telnet Syslog function, Server local-buffer Snmp v1/v2/v3 Snmp configuration /contact/location/parameter Ip route 80.80.80.0 255.255.255.0 XSR-18051config#aaa user XSR-18051config-aaa#password XSR0r1 VPN Ipsec site-to-site tunnel via pre-shared key Router-1 Ip route 10.10.10.0 255.255.255.0 XSR-18052config#aaa user XSR-18052config-aaa#password XSR0r2 VPN Ipsec site-to-site tunnel via pre-shared key Router-2 VPN Ipsec site-to-site tunnel certification PKI Request certificate from CA y/n ? y XSR-18051config#crypto ca identity Enterasys-Networks-CAPassword Re-enter password XSR-18051config#crypto ca crl request Enterasys-Networks-CA ENTITY-ACTIVE Certification control / certificates / Crls / CA identity Pptp encrypt mppe auto VPN Pptp User termination XSR-18051config#aaa user XSR-18051config-aaa#password XSR XSR-18052config#aaa user XSR-18052config-aaa#password XSR Version 6.0.0.0, Built Sep 14 2003 5r1 GRE native site-to-site tunnel 5r2 GRE native site-to-site tunnel Diffserv Dscp field addressing Description internalloopbackPrivate ip address 13.13.13.1 Firewall configurationDescription InteralnetworkPrivate ip address 10.10.10.1 Ip address 30.30.30.1 Vlan configuration 802.1q tagged routingIp address 20.20.20.1 XSR-1805 uptime is 0 days, 2 hours, 23 minutes A1.2 ping & tracerouteVersion 2.02, Built Feb 24 2003 Version 4.0.0.0, Built Mar 26 2003 Current operational speed is negotiated to 100 Mb/s Current operational duplex mode is negotiated to fullA1.4 telnet to other routers Physical link is currently up A1.6 verify the flash file checksum A1.5 flash/ cflash/ dir, rename, copy commands B1.1 show ip arp B1.0 show ip route C1.3 show crypto map C1.0 show tunnelsC1.1 show crypto isakmp sa C1.2 show crypto ipsec sa C1.7 show ip route / GRE via Ipsec C1.4 show tunnels / GRE via IpsecC1.5 show interface vpn / GRE via Ipsec C1.6 show crypto ipsec sa / GRE via Ipsec MTU is 1492 bytes D1.1 show ip interface atm 1/0.1D1.2 show controllers atm 1/0 VPI/VCI 1/32 D1.3 show controllers atm 1/0.1 IfLastChange 001609 ATM 1/0 is Admin Up / Oper UpAdministrative State is Enabled Operational State is UP D1.4 show interface atm 1/0 PPPoE is Oper Up ATM 1/0.1 is Admin Up / Oper UpD1.5 show interface atm 1/0.1 State Opened Current State ATM 1/0.1 PPP is Admin Up / Oper UpChap authentication success with D1.6 show ppp interface atm 1/0.1 Getting Help