Enviro 828 BV. INS, 828 BV. FS owner manual Table of Contents, Code Approvals, Specifications

	TABLE OF CONTENTS
1	Code Approvals	3
2	Specifications	3
3	Dimensions and Clearances to Combustibles	4
4	Deciding where to locate your stove	5
5	Assembly and Installation Instructions: A. Fireplace Insert	6
	B: Freestanding	7
6	Electrical Requirements	8
7	Gas Line Connection	8
8	Venting A: Fireplace Insert	10
	B: Freestanding	11
9	Air Shutter Adjustment	12
10	Installation of Log Sets and Embers	13
11	Operating Instructions	14
12	Routine Maintenance	15
13	Trouble Shooting	16
14	Parts and Accessories	17
15	Warranty	18
16	Installation Data Sheet	19
	1. CODE APPROVALS

These appliances have been tested by Canadian Standards Association. and found to comply with the established standards for GAS FIRED VENTED ROOM HEATER in CANADA and the USA as follows:-

ENVIROGAS 828 VENTED ROOM HEATER ( 828 BV FPI Nat & LPG. 828 BV FS Nat & LPG. )

TESTED TO: ANSI Z21.11.1b-1993, CAN 1-2.1M 86.

2. SPECIFICATIONS

ENVIROGAS 828 VENTED ROOM HEATER

This unit must be vented using certified B Vent venting.

•has been certified for use with either natural or propane gases. (see rating label.)

•is not for use with solid fuels.

•is approved for bedroom or bedsitting room.

•Fireplace Insert must be installed on a non-combustible surface.

•must be installed in accordance with local codes.

If none exist use current installation code CAN/CGA B149 in Canada or ANSI Z223.1/NFPA 54 in the USA.

•must be properly connected to a venting system.

WARNING: For Fireplace Insert, installation only in a solid fuel burning fireplace with a

working flue and constructed of non combustible material, using a certified chimney liner kit.

3