Manuals / Enviro / Household Appliance / Stove

Enviro C-10135 owner manual Exterior Mounted Exhaust Blower

Models: C-10135

1 38
Download 38 pages 4.08 Kb
Page 21
Image 21

Installation

EXTERIOR MOUNTED EXHAUST BLOWER:

The MERIDIAN can be equipped with an externally mounted exhaust blower (PART #20-070). This optional kit will include all components necessary to install the exhaust blower on any external vertical wall surface.

Choose a location for your stove that meets the requirements stated in this manual and allows installation with the least amount of interference to house framing, plumbing, wiring, etc.

INCLUDED IN THE EXTERIOR MOUNTED EXHAUST BLOWER KIT ARE:

1.Open the left side of the unit and the back grill and disconnect the Exhaust Blower wires from the harness. Remove the exhaust blower by undoing the six 1⁄4 hex head sheet metal screws that fasten the blower to the housing.

2.Remove the back grill from the exterior exhaust vent housing and remove the round cover plate installed on the blower housing.

3.Install the round cover plate over the gasketed opening in the stove where the exhaust motor was removed from.

4.Install the exhaust blower motor in the Exterior Vent Housing Box onto the exhaust blower housing.

5.Follow the procedures for “through the wall installations”. Place the unit in the desired location. Cut the hole in the wall at the desired location. Install a wall thimble.

6.Drill holes in the wall thimble in the corresponding locations for wire and fresh air if needed. Install wire clamps and feed wire through the hole in the thimble into the house. Tighten clamp on wire and attach green ground wire (at the symbol) with the screw and star washer provided.

7.Attach a short or an adjustable section of 3” of double wall pellet vent through the wall thimble to the stove. Seal all joints with silicone. Maintain clearances to combustibles

8.Apply silicone to the pipe in the Exhaust Box, slide the pipe into the exhaust vent. Mount the Exhaust Box to the house. Reinstall the back grill on the Exterior Vent Housing Box. Apply normal venting practices when installing the vertical vent pipe.

9.Connect the wires in the stove. Re-install the Left side and Back Grill on the stove.

10.Set the Slider Damper as described in “SLIDER/

DAMPER SETTING“ INSTRUCTIONS.

Left side with cab side removed

Exhaust motor must be replaced with cover plate.

Exhaust motor

�������� �������� � ��������

������ � �������

21

Page 20 Page 22
Page 21
Image 21
Enviro C-10135 owner manual Included in the Exterior Mounted Exhaust Blower KIT are
Page 20 Page 22

C-10135 specifications

Enviro C-10135 is a cutting-edge solution that has emerged to address the growing concerns in environmental management and sustainability. Designed to meet the demands of modern industries, it incorporates a wide array of features and technologies that set it apart in the field.

One of the standout characteristics of Enviro C-10135 is its innovative waste management capabilities. The system employs advanced sorting and recycling technologies that enable efficient separation of contaminants from recyclable materials. This not only streamlines the recycling process but also significantly reduces the volume of waste sent to landfills. With a focus on circular economy principles, Enviro C-10135 helps industries adopt more sustainable practices while minimizing their environmental footprint.

The technology behind Enviro C-10135 is grounded in real-time data analytics. Integrated sensors monitor environmental conditions and waste composition continuously. This data is processed using advanced algorithms that provide actionable insights for waste management strategies. As a result, users can optimize operational efficiency, reduce costs, and enhance compliance with regulatory requirements.

Another key feature of Enviro C-10135 is its adaptability. The system can be customized to fit the specific needs of various industries, ranging from manufacturing to hospitality. Manufacturers can modify its settings to handle different types of waste, while facilities in the hospitality sector benefit from tailored solutions for food waste and packaging materials. This versatility makes Enviro C-10135 an attractive choice for businesses of all sizes.

Energy efficiency is also a salient characteristic of the Enviro C-10135. The system is engineered to minimize power consumption without compromising performance. It employs energy recovery technologies that harness excess energy generated during waste processing, which can be redirected for operational needs. This aspect not only lowers operational costs but also contributes to sustainability goals.

In addition to its technological prowess, Enviro C-10135 is user-friendly. The interface is designed to provide intuitive navigation for operators, easing the learning curve and ensuring efficient operation. Training programs and support are also available to assist users in maximizing the system's potential.

In summary, Enviro C-10135 is at the forefront of environmental technology, offering advanced waste management features, real-time monitoring and analytics, adaptability for various applications, energy efficiency, and user-friendly operation. As industries strive to meet sustainability targets, Enviro C-10135 stands as a vital asset in achieving these goals and fostering a cleaner, more sustainable future.