Introduction

* This manual is designed for the home owner in conjunction with the technical manual. *

PELLET QUALITY:

Pellet quality is important, please read the following:

Your enviro pellet stove has been designed to burn wood pellets only. Do not use any other type of fuel, as this will void any warranties stated in this manual.

The performance of your pellet stove is greatly affected by the type and quality of wood pellets being burned. As the heat output of various quality wood pellets differs, so will the performance and heat output of the pellet stove.

CAUTION: It is important to select and use only pellets that are dry and free of dirt or any impurities such as high salt content. Dirty fuel will adversely affect the operation and performance of the unit and will void the warranty. The Pellet Fuel Industries (P.F.I.) has established standards for wood pellet manufacturers. We recommend the use of pellets that meet or exceed these standards. Ask your dealer for a recommended pellet type.

P.F.I. PELLET STANDARDS:

 

Fines (fine particles)

1% maximum through a 1/8” screen

Bulk Density

40 pound per cubic foot minimum

Size

1⁄4” to 5/16” diameter 1⁄2 – 11⁄2” long maximum

Ash Content

1% maximum (Premium grade)

..................

3% maximum (Standard grade)

Moisture Content

8% maximum

Heat Content

approximately 8200 Btu per pound minimum

ASH: The ash content of the fuel and operation of your stove will directly determine the frequency of cleaning. The use of high ash fuels may result in the stove needing to be cleaned daily. A low ash fuel may allow longer intervals between cleaning.

CLINKERING: [clinkers are silica (sand) or other impurities in the fuel that will form a hard mass during the burning process]. This hard mass will block the air flow through the Burn Pot Liner and affect the performance of the stove. Any fuel, even approved types, may tend to clinker. Check the Burn-Pot Liner daily to ensure that the holes are not blocked with clinkers. If they become blocked, remove the liner (when the unit is cold) and clean/scrape the clinkers out. Clean the holes with a small pointed object if required. Refer to the section Routine Cleaning and Maintenance.

PELLET FEED RATES: Due to different fuel densities and sizes, pellet feed rates may vary. This may require an adjustment to the slider damper setting or to the auger feed trim setting on Low.

Since Sherwood Industries Ltd. has no control over the quality of pellets that you use, we assume no liability for your choice in wood pellets.

Store pellets at least 36” (1 m) away from the pellet stove.

3

Page 2 Page 4
Page 3
Image 3
Enviro 50-1220, C-10792 Introduction, I. Pellet Standards, Store pellets at least 36 1 m away from the pellet stove
Page 2 Page 4

50-1220, C-10792 specifications

Enviro C-10792,50-1220 is an innovative solution designed to meet the increasing demands of environmental sustainability while enhancing operational efficiency across various industries. This advanced product has been engineered with a focus on performance, durability, and eco-friendliness, making it ideal for organizations looking to minimize their environmental footprint without compromising on quality.

One of the primary features of Enviro C-10792,50-1220 is its exceptional compatibility with a wide range of materials. The formulation is designed to work seamlessly with various substrates, ensuring a strong bond that enhances the longevity of applications. This characteristic is particularly beneficial in sectors such as construction and manufacturing, where adherence to strict performance standards is essential.

Technology plays a pivotal role in the development of Enviro C-10792,50-1220. The product utilizes cutting-edge nanotechnology to enhance its properties, resulting in increased resistance to environmental stressors such as UV exposure, moisture, and temperature fluctuations. This innovative approach not only improves the product's longevity but also ensures that it maintains its structural integrity over time, reducing the need for frequent maintenance or replacements.

In terms of environmental impact, Enviro C-10792,50-1220 is formulated to be low in volatile organic compounds (VOCs). This characteristic makes it a safer choice for workers and the surrounding environment, aligning with global standards for environmentally friendly materials. By choosing this product, companies can contribute to cleaner air quality and reduced pollution levels, which is increasingly important in today’s regulatory landscape.

Another notable characteristic of Enviro C-10792,50-1220 is its easy application process. The user-friendly formulation allows for quick and efficient installation, reducing labor costs and minimizing downtime. This ease of use does not compromise the performance, ensuring that projects can be completed on time without sacrificing quality.

In summary, Enviro C-10792,50-1220 stands out as a versatile, durable, and eco-friendly solution suitable for various applications. With its advanced technology and robust characteristics, it enables organizations to achieve their sustainability goals while maintaining high performance standards. As industries continue to evolve towards more sustainable practices, Enviro C-10792,50-1220 is poised to play a crucial role in this transformation.
Top Page Image Contents