Manuals / Enviro / Household Appliance / Stove

Enviro 50-1220, C-10792 owner manual Keep ASH PAN Free of RAW Fuel

Models: 50-1220 C-10792

1 14
Download 14 pages 47.98 Kb
Page 5
Image 5

Introduction

ASHES: Disposed ashes should be placed in a metal container with a tight-fitting lid. The closed container of ashes should be on a non-combustible floor on the ground, well away from all combustible materials pending final disposal. The ashes should be retained in the closed container until all cinders have thoroughly cooled before disposing of them.

ELECTRICAL: The use of a surge protected power bar is recommended. The unit must be grounded. The grounded electrical cord should be connected to a standard 110-120 volts, nominal average 2.0 Amps (4.1 Amps peak), 60 hertz electrical outlet and also must be accessible. If this power cord should become damaged, a replacement power cord must be purchased from the manufacturer or a qualified ENVIRO dealer. Be careful that the electrical cord is not trapped under the appliance and that it is clear of any hot surfaces or sharp edges. This unit’s maximum power requirement is 184 watts (322 watts peak).

GLASS: Do not abuse the glass by striking or slamming the door. Do not attempt to operate the stove with broken glass. The stove uses ceramic glass. Replacement glass must be purchased from an ENVIRO dealer. Do not attempt to open the door and clean the glass while the unit is in operation or if glass is hot. To clean the glass, use a soft cotton cloth and mild window cleaner, gas or wood stove glass cleaner, or take a damp paper towel and dip into the fly ash. This is a very mild abrasive and will not damage the glass.

FLAMMABLE LIQUIDS: Never use gasoline, gasoline-type lantern fuel, kerosene, charcoal lighter fluid, or similar liquids to start or “freshen up” a fire in the heater. Keep all such liquids well away from the heater while it is in use.

SMOKE DETECTOR: Smoke detectors should be installed and maintained in the structure when installing and operating a pellet burning appliance.

OPERATION: The ash pan and door must be closed securely for proper and safe operation of the pellet stove. Also ensure all gaskets on the door are checked and replaced when necessary.

KEEP ASH PAN FREE OF RAW FUEL.

DO NOT PLACE UNBURNED OR NEW PELLET FUEL IN ASH PAN. A fire in the ash pan may occur.

If you have any questions with regards to your stove or the above-mentioned information, please feel free to contact your local dealer for further clarification and comments.

SINCE SHERWOOD INDUSTRIES LTD. HAS NO CONTROL OVER THE INSTALLATION OF YOUR STOVE, SHERWOOD INDUSTRIES LTD. GRANTS NO WARRANTY IMPLIED OR STATED FOR THE INSTALLATION OR MAINTENANCE OF YOUR STOVE. THEREFORE, SHERWOOD INDUSTRIES LTD. ASSUMES NO RESPONSIBILITY FOR ANY CONSEQUENTIAL DAMAGE(S).

SAVE THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE

5

Page 4 Page 6
Page 5
Image 5
Enviro 50-1220, C-10792 owner manual Keep ASH PAN Free of RAW Fuel
Page 4 Page 6

50-1220, C-10792 specifications

Enviro C-10792,50-1220 is an innovative solution designed to meet the increasing demands of environmental sustainability while enhancing operational efficiency across various industries. This advanced product has been engineered with a focus on performance, durability, and eco-friendliness, making it ideal for organizations looking to minimize their environmental footprint without compromising on quality.

One of the primary features of Enviro C-10792,50-1220 is its exceptional compatibility with a wide range of materials. The formulation is designed to work seamlessly with various substrates, ensuring a strong bond that enhances the longevity of applications. This characteristic is particularly beneficial in sectors such as construction and manufacturing, where adherence to strict performance standards is essential.

Technology plays a pivotal role in the development of Enviro C-10792,50-1220. The product utilizes cutting-edge nanotechnology to enhance its properties, resulting in increased resistance to environmental stressors such as UV exposure, moisture, and temperature fluctuations. This innovative approach not only improves the product's longevity but also ensures that it maintains its structural integrity over time, reducing the need for frequent maintenance or replacements.

In terms of environmental impact, Enviro C-10792,50-1220 is formulated to be low in volatile organic compounds (VOCs). This characteristic makes it a safer choice for workers and the surrounding environment, aligning with global standards for environmentally friendly materials. By choosing this product, companies can contribute to cleaner air quality and reduced pollution levels, which is increasingly important in today’s regulatory landscape.

Another notable characteristic of Enviro C-10792,50-1220 is its easy application process. The user-friendly formulation allows for quick and efficient installation, reducing labor costs and minimizing downtime. This ease of use does not compromise the performance, ensuring that projects can be completed on time without sacrificing quality.

In summary, Enviro C-10792,50-1220 stands out as a versatile, durable, and eco-friendly solution suitable for various applications. With its advanced technology and robust characteristics, it enables organizations to achieve their sustainability goals while maintaining high performance standards. As industries continue to evolve towards more sustainable practices, Enviro C-10792,50-1220 is poised to play a crucial role in this transformation.