Install 2 spring spacers around the flex pipe. Slide the horizontal section of pipe over the flexible liner and install through the wall thimble, ensure that this portion of pipe slides onto the vent termination cap. Slide the inside finished collar over the horizontal section of pipe and secure to wall using the screws provided. Slide the 90° elbow over the flex pipe. Stretch the flex liner to a length long enough to ensure the flex liner can be easily connected to the flue outlet of the appliance. Install the remaining spring spacers over the flexible liner and install the vertical section of pipe.(DO NOT SLIP THESE SECTIONS OF PIPE TOGETHER, YOU WILL REQUIRE SOME MOVEMENT IN THESE PIPE SECTIONS IN ORDER TO SECURE THE FLEX PIPE TO THE FLUE OUTLET ON THE APPLIANCE.)
Place a bead of high temperature silicone on the flue pipe and slide flex liner over collar, secure the flex liner with 3 sheet metal screws evenly spaced.
Align all straight sections of pipe, slipping all joints together and installing 3 sheet metal screws evenly spaced.
A small can of touch up paint has been supplied with this kit. Lightly touch up any scratches that might have accord during the installation process.
Install brass decorative rings around each joint making sure this decorative ring covers the sheet metal screws which secure each section of pipe together and secure to vent pipe in the slotted tab on the backside of the pipe so that the fastener would not be easily seen.
SPRING
SPACERS
Secure the horizontal section of pipe to the inside finished collar by installing a
screw in the tab on the inside finished collar. (THIS WILL PREVENT THE PIPE FROM BEING DISCONNECTED AT THE VENT TERMINAL.)
Light the appliance and ensure proper operation.
WALL THIMBLE | HORIZONTAL WALL |
FIRE STOP | TERMINATION |
WALL
FRAMING
DECORATIVE |
| INSIDE |
BRASS RINGS |
| |
| FINISHED | |
|
| |
|
| COLLAR |
| EXHAUST |
|
| 4” FLEX | COMBUSTION |
| PIPE | |
| AIR | |
|
| |
|
| 6 5/8” OUTER |
|
| PIPE |
12
