INSTALLATION OF LOGSET and EMBERS
INSTALLING THE GLOWING EMBERS
A bag of Rock Wool embers is provided for use on the burner.
CAUTION: Use only the type of ember material supplied with this appliance. Due to the amount of ember material there may be more than required.
If over time, through cleaning and servicing, these embers require replacement, contact your nearest ENVIROGAS dealer for replacement embers.
Remove the ember material from the plastic bag.
Cover the shaded areas in the diagram shown beside.
Totally fill these areas with glowing ember material.
DO NOT PACK DOWN. LEAVE
EMBER MATERIAL LOOSE.
CAUTION: NEVER OPERATE THIS APPLIANCE WITH THE DOOR REMOVED
INSTALLING THE LOGSET
Carefully remove log from box. Check to ensure there is no damage. It is very important to install this log in its proper position to insure safe, optimum operating conditions.
•Open the front door.
•Place each piece of the log set into the firebox resting on the pins provided. Ensure that the holes in logs line up.
•Close the door and tighten securely.
Upon the first light up, watch for ignition to all burner ports. If a long delay is noted:
•First, wait for the appliance to cool down
•Open the front door of the appliance.
•Check to carefully
14