TO USE THE MENUS
1.Press the MENU button to display the main menu
2.Use the cursor up/down to select a menu item.
3.Use the cursor left/right to enter a submenu.
4.Press the OK button to enable/disable the function.
5.Press the MENU or EXIT button to exit the menu.
Press the MENU button to enter the main OSD (On Screen Display). Adjust the items including Setup menu, Video menu, Audio menu and Feature menu. However, some function items in the menus may only be enabled in the particular source modes.
SETUP MENU
English |
The Setup menu in TV mode shows as below. In others source modes, the Setup menu only shows Menu Language and Aspect Ratio items.
1.Tuning Band: Select TV source signal from the Air (antenna) or Cable (CATV).
2.DTV Signal: Show the intensity of the received DTV signal.
3.Auto Ch Search: Automatically scan all NTSC / ATSC TV channels and
then store in the channel table. In channel scan process, the OSD can display the number of channels which had been found.
13
