ASSEMBLY

To hire a service technician to assemble this prod- uct in your home, call 1-800-445-2480.

Assembly requires two persons.

Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps.

The underside of the walking belt is coated with high-performance lubricant. After shipping, there may be some lubricant on top of the walking belt or on the shipping carton. This is normal. If there is lubricant on top of the walking belt, wipe it off with a soft cloth and a mild, non-abrasive cleaner.

To identify small parts, see page 6.

Assembly requires the following tools:

the included hex keys

one adjustable wrench

one Phillips screwdriver

To avoid damaging parts, do not use power tools.

1.Make sure that the power cord is unplugged.

With the help of a second person, raise the front of the treadmill and insert the crossbar on the Base (103) into the cutout in the cardboard stand as shown. Have the second person hold the treadmill until assembly step 3 to prevent it from moving forward or backward.

WARNING: Serious in- jury may occur if the treadmill moves forward or backward and falls off the cardboard stand. A second person must hold the treadmill until assembly step

3 to prevent the treadmill from moving, tipping, or falling.

1

103

Cardboard

Stand

7

Page 7
Image 7
Epic Fitness TL 2710 manual Assembly, Make sure that the power cord is unplugged