Epson 11880 Usingi the Auto Take-UpReell, Winding Paper Forward, Winding Paper Backward

You can wind paper forward or backward.

Before you print, make sure you press and select .

1Set the paper guides to the forward position.

2Align the edge of the paper with the horizontal line. Then press the button to feed the paper.

3Use three pieces of tape to attach the paper to the take-up reel core.

4Press the button to feed the paper and create some slack.

5Press the button until appears on the LCD.

6Hold down the Auto Forward button on the control panel to rotate the take-up reel and wind a small length of paper.

7When you’re ready to print, make sure Auto Cut is set to Off in the printer driver.

1Set the paper guides to the vertical position.

2Align the edge of the paper with the horizontal

and vertical lines. Then press the button to feed the paper.

3Pull the paper around the back of the take-up reel core and use three pieces of tape to attach the paper to the core.

4Press the button to feed the paper and create some slack.

5Hold down the Auto Backward button on the control panel to rotate the take-up reel and wind a small length of paper.

6When you’re ready to print, make sure Auto Cut is set to Off in the printer driver. Then send your print job to the printer.