Epson 11880 Replacingl i Printeri Parts (continued)i, Replacing the Maintenance Tank

Replacingl i Printeri Parts (continued)i

6Hold down the side pin, as shown, then turn the latch to the right.

7Release the side pin and carefully remove the cutter blade.

8Insert the new cutter blade.

9Hold down the side pin while turning the latch to the left.

10Close the front cover. The cutter returns to the home position.

Replacing the Maintenance Tank

You need to replace one of the maintenance tanks (part # C12C890191) when you see MAINT TANK FULL on the LCD, along with an indication of which tank is full.

1Check the LCD to determine which tank needs to be replaced.

Left

tank

Right tank

Center tank

2Make sure the printer is on, and pull out the maintenance tank as shown.

Caution: Do not tip the tank, or ink may spill out.

3Place the used tank in the plastic bag included with the new tank.

4Insert the new tank.

8