4.Make sure EPSON Stylus Photo 1400 Series is selected, then click Print Position Confirmation Pattern.
5.Click Print. The confirmation pattern is printed on the CD or DVD.
6. Remove the CD or DVD and measure the distance from the edge of the hole to the small cross marks labeled Top and Right. You’ll need a metric ruler with millimeters for accurate measurements.
7.Open the File menu, select Print, then select Adjust Print Position. You see a screen like this:
8.Click Enter Values, then input the Top distance (from your measurement) in the Height (Top) box. Enter the Right distance (from your measurement) in the Width (Right) box.
9.Click OK to save the measurements.
Adjusting the Print Density with Windows
If ink smears on your printed CDs or DVDs, you may need to adjust the color saturation or ink density. CDs and DVDs from different manufacturers may absorb ink differently, so you may need to adjust the density for each type of disc. Follow these instructions to print a color saturation check pattern, and then make adjustments as necessary.
1.Place an extra
2.Start Epson Print CD.
3.Open the File menu and select Print.
4.Make sure EPSON Stylus Photo 1400 Series is selected, then click Print Density Confirmation Pattern.
5.Click Print.
36Printing from Start to Finish