9.Peel the backing from the stopper and from the paper eject support provided with the ADF. Then attach the stopper and paper eject support to the scanner as shown. Insert the tabs on the paper eject support into the slots at the right end of the document table.

Paper eject

Stopper

support

There are two stoppers included with the ADF, a light gray one and a dark gray one. Use the light gray stopper, not the dark gray stopper.

10. Close the ADF.

If you haven’t connected the scanner to your computer, see the Start Here sheet for instructions.

Loading Paper in the Automatic Document Feeder

The ADF can hold up to 100 sheets of the following paper sizes, based on a paper weight of 17 pounds (64 g/m2) and a thickness of 0.2 inch (6.0 mm) or less:

Paper size

Direction

 

 

A3, Ledger, B4, Legal, A4, Letter, B5, A5, 5.5 ⋅ 5.8-inch (140 ⋅ 148 mm)

Portrait

 

 

A4, Letter, B5, A5

Landscape

 

 

Before loading the ADF, make sure the document:

■Has no wet ink on it.

■Has no holes or no cut-out areas.

■Is not ripped or wrinkled.

■Has no staples or other objects attached that may damage the feeder.

■Has no folds.

■Is not a multipart form.