8. Connect the transparency unit’s connector to the option (ADF/TPU) connector at the back of the scanner. Tighten the attached screws to secure

the connector.

If you haven’t connected the scanner to your computer, see the Start Here sheet for instructions. Then plug the scanner in and turn it on.

See Chapter 2 for scanning instructions.

Using the Film Guides

You can use the four film guides that came with the scanner to scan 35 mm slides, strips of 35 mm negative or positive film, 120-size or 220-size format film, and 4 ⋅ 5-inch film.

When using the film guides, be sure the transparency unit is completely closed and the calibration area (next to the notch on the transparency guide) is uncovered or an error will occur and you will be unable to scan.

Store the reflective document mat in the transparency unit pocket when not in use.