Epson 1640XL Loading 35 mm slides

Loading 35 mm slides

Follow these steps to load 35 mm slides:

1. Load slides in the 35 mm slide holder as shown. Make sure the glossy side of each slide faces down, and the film emulsion layer faces up.

2.Position the slide holder on the document table. Align the

slide holder with the notch on the transparency guide as shown.

3. Close the TPU and begin your scan.

If you’re using EPSON Scan to scan, set the following options:

■ If you’re using Home Mode, set Positive Film as the Document Type option.

■If you’re using Professional Mode, set the Document Type option to Transparency, and then set the Film Type option to Positive Film.