1Power light
2Lamp light
3Temperature light
Power light | Lamp light | Temperature | Status and solution |
|
| light |
|
Green | Off | Off | Normal operation. |
Flashing green | Off | Off | Warming up. Wait for an image to appear. |
Orange | Off | Off | Standby or sleep mode. |
Flashing orange | Off | Off | Preparing network monitoring or shutting down. |
|
|
| (Wait for the light to remain orange before |
|
|
| unplugging the projector.) |
Flashing red | Off | Flashing orange | Projector is too hot. |
|
|
| • Make sure that the vents and air filter are not |
|
|
| clogged with dust or obstructed by nearby |
|
|
| objects. |
|
|
| • Make sure the environmental temperature is not |
|
|
| too hot. |
|
|
| • If overheating continues, replace the air filter. |
Red | Off | Red | Projector has overheated and turned off. Leave it |
|
|
| turned off to cool down for five minutes. |
|
|
| • Make sure that the vents and air filter are not |
|
|
| clogged with dust or obstructed by nearby |
|
|
| objects. |
|
|
| • If operating the projector at high altitude, turn on |
|
|
| High Altitude Mode. |
|
|
| • If overheating continues, replace the air filter. |
|
|
| • If the problem persists, unplug the projector and |
|
|
| contact Epson for help. |
140