Solutions When the Image is Not Rectangular
If the projected image is not evenly rectangular, try the following solutions:
•Place the projector directly in front of the center of the screen, facing it squarely, if possible.
•If you adjusted the projector height using the projector feet, press the keystone buttons on the projector to adjust the image shape.
•Turn on automatic keystone adjustments using the projector's menus.
•Press the Screen Fit button (PowerLite 1775W) and adjust the image shape using the
•Adjust the Quick Corner setting to correct the image shape.
Parent topic: Solving Image or Sound Problems
Related references
Projector Feature Settings - Settings Menu
Related tasks
Automatically Correcting Image Shape With Screen Fit
Correcting Image Shape With Quick Corner
Solutions When the Image Contains Noise or Static
If the projected image seems to contain electronic interference (noise) or static, try the following solutions:
•Check the cables connecting your computer or video source to the projector. They should be:
•Separated from the power cord to prevent interference
•Securely connected at both ends
•No longer than 9.8 feet (3 m)
•Not connected to an extension cable
•If you are projecting from a laptop computer, try turning off simultaneous display on the laptop screen to avoid splitting the video signal.
•Check the settings on the projector's Signal menu to make sure they match the video source. If available for your video source, adjust the Progressive and Noise Reduction settings.
•Select a computer video resolution that is compatible with the projector.
•If you are projecting from a computer, press the Auto button on the remote control to automatically adjust the tracking and sync settings.
146