Epson 1815 When the Projector you want to Connect to is not Displayed, ESSID, projectors you can narrow the search field by using

When the Projector you want to Connect to is not Displayed 25

For reasons such as the following, there are times when the projector you want is not displayed in the EMP NS Connection’s projector selection screen.

•The electromagnetic waves for the wireless LAN are out of range or weak.

•The network’s subnet is different.

In this case you can search by using "Manual Search" or "Profile".

You can search by specifying the projector’s IP address or the projector’s name when using "Manual search" in Advanced

Connection Mode.

Also, information for the projector that is frequently used (such as the IP address) can be saved as a profile and you can search for the projector by specifying the information. s p.29

• When you use "Manual search" in Quick Connection q Mode, you can specify the ESSID. When there are a lot of

projectors you can narrow the search field by usingESSID.

•When the target projector is not displayed, it may be set to "AirPort: Not inserted", or an appropriate access point may not have been selected.

In the following explanations, unless otherwise noted, Windows screen shots are used.

You see a similar screen even when using Macintosh.

Searching by Specifying the IP Address and Projector Name (For Advanced Connection Mode)

Procedure

A Click "Manual search" on the EMP NS Connection’s projector selection screen.