Start the Web browser on the computer.

Changing Settings Using a Web Browser (Web Control)

35

 

 

You can set up and control the projector from a computer by using the Web browser of a computer that is connected to the projector via a network. Setup and control operations can be performed remotely if this function is used. In addition, since you can use the computers keyboard, entering characters required for the setup is easier.

Use Microsoft Internet Explorer 6.0 or later as the Web browser. If using a Macintosh, you can also use Safari. However,

if using Safari under Macintosh 10.2.8, some of the Web control radio buttons may not display properly.

Setup and control with a Web browser are possible if set to q"Network ON" in the "Extended" menu of the projector’s

configuration menu, even if the projector is in standby mode (when the power is off).

Displaying Web Control

Display Web control with the following procedure.

If your Web browser is set up to connect via a proxy server, qWeb control cannot be displayed. To use the Web control,

you need to make network connection settings with other than a proxy server.
fEntering the IP address of the projector

Web control can be opened by specifying the IP address of the projector as follows when connecting using the optional Ethernet unit or when using Advanced Connection Mode of a wireless LAN.

Procedure

A

B Enter the IP address of the projector in the address bar of the Web browser, and press the [Enter] key on the computer’s keyboard.

Web Control is displayed.

Projector Setup

You can set items that are usually set in the projector’s configuration menu. The contents set are reflected in the configuration menu.

fItems in the configuration menu that cannot be set by the web browser

All items in the configuration menu can be set with the exception of the following items.

•"Settings" - "Pointer Shape", "EasyMP Audio Out"

•Registering a user’s logo using "Extended" - "User’s Logo"

•"Extended" - "Operation" - "High Altitude Mode"

•"Extended" - "Link21L", "Language"

•"Reset" - "Reset All", "Reset Lamp Hours"

The items available on each menu are the same as the configuration menu of the projector.

sUser’s Guide "List of Functions"

sUser’s Guide "Network Menu (EMP-1815 Only)" The "MAC Address" is not displayed.