Epson 1815 Management Using SNMP, instead, someone who is familiar with the network, wireless LAN in the Quick Connection Mode

Management Using SNMP 38

By setting SNMP in the EasyMP network setting, notification messages will be sent to preset e-mail addresses when a problem or warning occurs with a projector. This is useful when controlling projectors centrally at a point distant from them.

q	• SNMP should be managed by a network administrator or
	someone who is familiar with the network.
	• The SNMP function to monitor the projector requires
	SNMP Manager to be installed on the computer.
	• The managing function using SNMP cannot be used via a
	wireless LAN in the Quick Connection Mode.
	• Up to two destination IP addresses can be recorded, so that
	if the notification message cannot be sent to the first IP
	address specified, it will be sent to the second IP address
	instead.

To set SNMP, select "SNMP" from network settings on the projector’s configuration menu. sUser's Guide "Network Menu (EMP-1815 Only)" "SNMP Menu"