Turning the Projector Off

To turn off the projector, press the Off button on the remote control (or press the Power button on the projector twice).

Let the projector cool while the P power light flashes red (about 30 seconds). Once the light stops flashing and stays on, it’s safe to unplug the projector.

Caution: Turn the projector off when not in use. Continuous 24-hour-a-day use may reduce its overall life. Never unplug the projector without pressing the Off button and letting it cool, or you could damage the projector and reduce lamp life.

Selecting the Image Source

The Source buttons let you switch between images output from different pieces of equipment connected to the projector (such as a DVD player, cable or satellite box, or video game console).

If you don’t see the image you want, press the Source button that corresponds to the port to which your video source is connected.

For example:

Note: If you’re projecting in a darkened room, press the button (located near the bottom of the remote control). This lights up all the keys.

To temporarily turn off the image and darken the screen (without turning off the projector), press the Blank button. Press the Blank button again to return to normal viewing.

22