Positioning the Image

If the image is not centered on the screen, use the horizontal and vertical lens shift knobs to adjust its position.

Note: You can display a test pattern to facilitate adjustment. Press the Pattern button on the remote control, then select Cross-hatching.

If you still need to raise the height of the image after using the vertical lens shift knob, lift the front of the projector and rotate the adjustable feet until the image is positioned correctly. You can also use the feet to correct the angle of the image if it’s tilted.

Performing Keystone Correction

If the projected image looks like

or

, use the Keystone function to correct its shape.

Note: If the image is shaped like

or

, the projector has been placed off to the side of the

screen and angled toward it. Face the projector straight ahead (instead of at the center of the screen), then use the horizontal lens shift knob to center the image.

To perform keystone correction:

1.Press the Menu button on the remote control.

2.Use the menu navigation buttons to open the Setting menu, then open the Screen menu, and then select

Keystone.

3. Use the arrow buttons to adjust the shape of the image.

4. Press the Menu button when done.

19