Using Cinema Color Editor
You can use the Cinema Color Editor software that came with your projector to adjust each color in the picture individually. You can also use the software to operate the projector in place of your remote control, letting you switch image sources, adjust the picture’s aspect ratio, or change image quality settings. Once you’ve adjusted the picture to your liking, you can save your settings so you can easily recall them for future use.
Setting Up Your Computer
Before using Cinema Color Editor, follow the instructions in this section to install the software and connect the projector to your computer.
System Requirements
You can install Cinema Color Editor on any Windows® or Macintosh system that meets these minimum requirements:
Windows | Macintosh |
|
|
Microsoft® Windows 98 SE, 2000, | Macintosh OS 8.6 through 9.x, OS X |
NT® 4.0, Me, or XP | 10.1.5 or later |
|
|
Pentium® MMXTM, 166 MHz or better | Power Macintosh G3, 300 MHz or better |
|
|
10MB RAM, 2MB hard disk space | 7MB RAM, 5MB hard disk space |
|
|
XGA (1024 ⋅ 768) or better display adapter and monitor
39