Resetting the Projector

If the image quality isn’t what you expect, one or more settings may be adjusted improperly. If necessary, you can restore the projector to its factory-default (original) settings.

To restore the settings in a specific menu (such as the Image or Setting menu), open that menu, select Reset, and confirm as needed. The example below shows how to reset the Image menu:

Open the Image menu . . .

. . . and select

Reset

You can also reset the lamp usage timer, clear the memory settings, or restore all the projector settings to their original values. Follow these steps:

1.Press the Menu button on the remote control.

2.Open the Reset menu.

3.Do one of the following:

■Select Lamp-Hours Reset to clear the lamp usage timer and reset it to zero (see page 53 for more information).

■Select Memory Reset to clear any memory settings you created as described on page 33.

■Select All Reset to return all projector menus to their original settings.

Note: All Reset does not reset the lamp timer, menu language, Input Signal, and memory settings.

34