EPSON Stylus Scan 2500
5.Click the Print Head Alignment icon. Follow the instructions on the screen to print a test page and select the correct alignment.
4.Push the transportation lock right to lock the scanner carriage.
Cleaning the EPSON Stylus Scan
To keep your EPSON Stylus Scan operating at its best, clean it several times a year. Follow these steps:
1.Turn the EPSON Stylus Scan off, unplug the power cord, and disconnect the cable.
Warning:
Be careful not to touch the internal gears.
2.Remove all paper from the sheet feeder.
3.Use a soft brush to clean loose dust and dirt.
4.Use a soft, clean cloth and mild detergent to clean the outer case and inside of the sheet feeder. Be careful not to soak the
5.Clean the document table with a soft, dry cloth, or with a blower brush.
6.If ink leaks inside the EPSON Stylus Scan, wipe it away with a damp cloth.
Caution:
Never use alcohol or thinners, and never spray lubricants inside the EPSON Stylus Scan. You could damage the printer mechanisms.
Transporting the EPSON Stylus Scan
Caution:
To avoid damage, always leave the ink cartridges installed when transporting the EPSON Stylus Scan. Also, remember to lock the print head and the transportation lock.
For short moves, you can just pick up the EPSON Stylus Scan and set it down. For longer moves, you need to repack it in its original box and lock the print head and transportation lock.
Follow these steps:
1.Turn on the EPSON Stylus Scan and wait until the print head locks in position. Then turn off the EPSON Stylus Scan.
2.Unplug the power cord, and then disconnect the interface cable.
3.Open the document and maintenance covers.
|
|
|
| |
|
|
|
| |
Lock the |
|
| ||
Push in the | ||||
transportation | ||||
output tray | ||||
lock. | ||||
extension. | ||||
|
| |||
5.Close the maintenance and document covers.
6.Remove all paper from the sheet feeder, and then remove the paper support.
7.Push in the output tray extension.
Caution:
Be sure to remove the tape used in step 8 before printing.
8.Use tape to secure the document cover. Secure the ink cartridge holder to the printer with tape, as shown below.
Use tape here.
9.Use the original box and packing materials to repack the EPSON Stylus Scan.
10.Keep the EPSON Stylus Scan level during transport.
Cleaning the Automatic Document Feeder’s Paper Path Guide
If you have an automatic document feeder and the quality of your scans or copies declines, cleaning the paper path guide might fix the problem.
11 - EPSON Stylus Scan 2500 | 9/99 |