Epson 2500 Related Documentation, CPD-8875, CPD-8874, TM-SCAN2500, PL-SCAN2500, User’s Guide, Parts Price List, EPSON Stylus Scan, EPSON Stylus Scan, EPSON Stylus Scan

EPSON Stylus Scan 2500

Turn off the EPSON Stylus Scan, then follow these steps to clean the guide:

1.Disconnect the automatic document feeder’s connector from the EPSON Stylus Scan’s option interface.

2.Lift the automatic document feeder straight up to remove it.3. Remove the paper support.

4.Place the automatic document feeder on a flat surface and turn it over. Locate the two white tabs at one end of the paper path guide. Pull the tabs slightly up, then push them through the brackets.

5. Pull the paper path guide up and out.

6.Using a soft, dry cloth, gently wipe any dust from the guide’s transparent plastic sheet. Be careful not to scratch the guide.

7.Reattach the paper path guide. Insert the transparent plastic sheet under the white mat.

8.Insert the guide’s tabs through the brackets at the back of the automatic document feeder. Push until the tabs clip into place.

Related Documentation

TM-SCAN2500	EPSON Stylus Scan 2500	Service Manual
PL-SCAN2500	EPSON Stylus Scan 2500	Parts Price List
CPD-8875	EPSON Stylus Scan 2500	User’s Guide
CPD-8874	EPSON Stylus Scan 2500	Start Here sheet

9/99 EPSON Stylus Scan 2500 - 12