EPSON Stylus Scan 2500

Control Panel

LCD panel

Scan

Paper Size

Darker/Lighter

Copy

Stop/Clear

 

 

Reduce/Enlarge B&W/Color Quality

Copies

Error Operate

 

 

 

Set

 

 

 

Hold for Menu Return

Item

 

The LCD panel displays the current copy settings. When you first turn on the EPSON Stylus Scan, you see these default settings: 100% B&W Normal 1. This means you’re set to produce one black and white copy, of the same size as the original document, at Normal quality (360 dpi resolution for everyday copying).

Accessing Menu Mode

You can use the control panel’s Menu Mode to print a status sheet, set the bottom margin, change from U.S. to metric paper sizes, set the language on the LCD panel, or reset the control panel to the factory defaults.

❏To access Menu Mode, hold down the B&W/Color and Quality buttons until Menu Mode appears in the LCD panel.

❏To exit Menu Mode, hold down the B&W/Color and Quality buttons until the LCD panel displays the copy mode settings.

Loading Paper

To load paper, slide out the left edge guide and place the stack of paper against the right side of the sheet feeder. Then slide the left edge guide against the paper.

Slide the left edge guide against the

paper.

Cut corner

If the paper has a cut corner, make sure you load it as shown.

Testing the Printer

You can run a printer check to determine whether the problem comes from the EPSON Stylus Scan or your computer.

1.Make sure both the EPSON Stylus Scan and your computer are turned off.
2.Disconnect the interface cable from the EPSON Stylus Scan.
3.Make sure paper is loaded.

4.Hold down the E load/eject button, then press and release the POperate button. Continue holding down the E load/eject button until the Operate light starts to flash, then release it.

A check page is printed, showing the ROM version number, ink counter, and a nozzle check pattern.

5.After the page is printed, turn off the power. Then reconnect the interface cable and turn on your EPSON Stylus Scan and computer.

❏If the results are satisfactory, the problem lies in your software settings, the interface cable, or your computer.

❏If the check page does not print correctly, you may have a problem with your EPSON Stylus Scan.

Using Special Media

Selecting Special Media

When you print on special media, you need to choose the correct Media Type and Paper Size settings in your printer software. The table below lists the available EPSON media and the corresponding Media Type setting for each one.

Media name

Media Type setting

 

 

Plain paper sheets or envelopes

Plain paper

 

 

EPSON 360 dpi Ink Jet Paper

360 dpi Ink Jet Paper

EPSON Iron-On Cool Peel Transfer Paper

 

 

 

EPSON High Quality Ink Jet Paper

Photo Quality Ink Jet

EPSON Photo Quality Ink Jet Paper

Paper

EPSON Photo Quality Ink Jet Cards

 

EPSON Photo Quality Self Adhesive Sheets

 

 

 

EPSON Photo Paper

Photo Paper

EPSON Photo Quality Glossy Paper

 

 

 

EPSON Photo Quality Glossy Film

Photo Quality Glossy Film

EPSON Photo Stickers

 

 

 

EPSON Ink Jet Transparencies

Ink Jet Transparencies

 

 

EPSON Matte Paper–Heavyweight

Matte Paper–

 

Heavyweight

 

 

7 - EPSON Stylus Scan 2500

9/99