EPSON Stylus Scan 2500

System Requirements

Windows®

❏An IBM® compatible PC with at least a 486/66 MHz processor (Pentium® processor recommended)

❏Microsoft® Windows 95 or 98
❏At least 16 MB of RAM (32MB or more recommended)
❏At least 50MB of free hard disk space (100MB recommended)
❏VGA or better display adapter and monitor (24-bit color recommended)

❏Double-speed (2x) CD-ROM drive for installing the software (quad-speed [4x] or faster recommended) for installing the software

Your system should also have one of the following interfaces (USB recommended):

❏Windows 98 only: Available USB port or hub connection, with shielded USB “AB” interface cable, from Series A (computer) to series B (EPSON Stylus Scan), up to 6.5 feet (2 m) long*

❏Windows 95 or 98: Available parallel port with a high- speed, bidirectional, IEEE-1284-compliant parallel cable (6 to 10 feet long).The cable must have a D-SUB, 25-pin, male connector for your computer and a 36-pin, Centronics® compatible connector for the Stylus Scan.**

Caution:

Using an improperly shielded USB cable—especially a cable more than 6.5 feet long—may cause the Stylus Scan to malfunction.

Notes:

*If you’re using a USB connection, Windows 98 must be preinstalled on your system—not an upgrade from Windows 95.

*If you’re using a USB hub, use only a first tier hub (the hub closest to the host computer).

**The EPSON Stylus Scan must be connected to a built-in parallel port (LPT 1 only). It cannot be used with a switch box or pass-through port (for example, on a Zip drive).

Macintosh®

❏iMac® series or other Macintosh computer with built-in USB port
❏Mac OS 8.1 or later (OS 8.5 or later recommended)
❏At least 32MB of available memory (64MB recommended)
❏At least 50MB of free hard drive space (100MB recommended)
❏VGA or better monitor (24-bit color recommended)

❏Double-speed (2x) CD-ROM (quad-speed [4x] or faster recommended) for installing the software

❏Available USB port or hub connection, with shielded USB “AB” interface cable, from Series A (computer) to Series B (EPSON Stylus Scan), up to 6.5 feet (2 m) long

Note:

If your iMac is running Mac OS 8.1, you need to install the iMac Update 1.0 before installing the EPSON Stylus Scan software. If your iMac is running Mac OS 8.5 or 8.51, Apple recommends that you install iMac Update 1.1.

These updates are available online from Apple at http:// swupdates.info.apple.com. Contact Apple if you have problems installing them.

Specifications

Mechanical

Paper feed method
Friction
Paper path
Sheet feeder, rear entry
Sheet feeder capacity
About 100 sheets at 17 lb (64 g/m²)

 

paper
Dimensions
Storage

 

Width: 20.4 inches (517 mm)

 

Depth: 20.8 inches (529 mm)

 

Height: 11.8 inches (300 mm)

 

Printing

 

Width: 20.4 inches (517 mm)

 

Depth: 22.6 inches (575 mm)

 

Height: 11.8 inches (300 mm)

Weight
26.5 lb (12 kg) without the ink

 

cartridges

Printing

Printing method
On-demand ink jet
Nozzle
Monochrome (black) 144 nozzles
configuration
Color (cyan, magenta, yellow)

 

 

144 nozzles

 

(48 [each color] × 3)
Resolution
Maximum 1440 dpi × 720 dpi
Print direction
Bidirectional with logic seeking
Control code
ESC/P raster

 

EPSON Remote
Input buffer
64 KB
3 - EPSON Stylus Scan 2500

9/99