Once Send Settings has been initiated, you will
notice activity in the original PhotoScript screen.
These printer configurations have now been loaded
into the RIP and are awaiting instructions from the
graphics application used to output the art...
Photoshop, Illustrator, Corel, etc.
Close the large PhotoMatch screen (pictured on the
previous page) by selecting Exit from the File menu.
Note that clicking the close box will not close this
screen.
The smaller PhotoMatch screen above MUST REMAIN
OPEN AT ALL TIMES for the RIP to function.
If a change in PrintModes is required during the day,
its not necessary to quit PhotoScript, just select
Printer Configuration again and repeat the process.
The configuration of the RIP is now complete and
youre now ready to print from your graphics applica-
tion.
11