Do not relocate the PhotoScript Folder to another location on your
hard drive. It must remain where the installer has originally placed
it.
If you decide to read the PhotoScript manual, you must still use
our technique to print using the RIP and not CADlinks.
DO NOT follow the Photoscript manual instructions on printing
from an application!
Do not attempt to select a Print Mode through the Device Options
Tab of the Print Properties dialog box.
Attempting to select a Hy-Rez QuikRIP PrintMode from within an
applications print dialog box may not work!
Hy-Rez QuickRIP settings MUST be loaded and sent to the RIP in
the manner outlined previously.
The application used to output the films will automatically utilize
these settings as the current settings.
It is important that the instructions in this manual are followed
exactly as stated to avoid any problem with performance and
accuracy.
WARNINGWindows Users Only
“The Most Important Part Of The Manual”
13