Installing Hy-Rez QuikRIP - Macintosh
After the PhotoScript installation is complete and your computer has
been restarted, its time to install Hy-Rez-QuikRIP.
Insert the Hy-Rez QuikRIP CD and run the Mac installer.
Although not required to restart again following the installation of
Hy-Rez QuikRIP, we recommend that you do so.
Using Hy-Rez QuikRIP - Macintosh
The security dongle may now be inserted into an available USB port.
Without it, PhotoScript will not function. Do not lose this small
piece of equipment! The cost of replacement is the price of the
software package itself.
At this point if PhotoScript does not recognize the dongle, quit the
program and relaunch the application. Its not necessary to restart
the computer.
The folder titled Epson PPDs contain modified postscript page de-
scription files which are required by Illustration programs such as
FreeHand and Illustrator in addition to most Page Layout applica-
tions such as PageMaker.
The Hy-Rez QuikRIP application will also be accessible through the
primary directory of your internal hard drive.
The installer has placed three files on the desktop (pictured
below) in addition to many other files within PhotoScript itself.
Simply launch the Hy-Rez QuikRIP application. Youll now be
asked for a serial number, enter the number located on the label of
the USB Dongle and click ok.
21