40 Making Detailed Adjustments
Selecting Memory Settings
You can easily recall the memory settings by using the memory
button on the remote control.
1. Press the
Memory
button on the remote control.
2. Select
Load Memory
or
Load Lens Position
.
3. Use the arrow buttons to select the desired setting, then press
the
Enter
button.
After a moment, the image appears on the screen using the
retrieved settings. Certain settings may not be applied, depending on the input signal.
Note: Because of the mechanical nature of the lens, you may need to fine-tune the adjustment
after loading a saved lens position.
Creating Memory Settings
Memory settings can be used to store most of the picture quality settings on page 34 and color
settings on page 36. Before saving them to memory, adjust the settings to the desired levels.
1. Press the
Memory
button on the remote control.
2. Select
Save Memory
or
Save Lens Position
.
3. Select the memory name you want to use, then press the
Enter
button to save your
settings.
Note: Saved settings are indicated by a green highlight next to the memory name. If you select
a name that is already in use, the existing settings will be erased and new ones saved in their
place.
Renaming Memory Settings
You can rename memory settings so that they are easier for you to recognize.
1. Press the
Memory
button on the remote control.
2. Select
Rename Memory
or
Rename Lens Position
.
3. Select the memory name you want to change, then press the
Enter
button. The name
selection screen is displayed.
4. Do one of the following:
■
To select a name from the displayed preset names, select the desired name and press
the
Enter
button.