Maintenance 55
5. Grasp the tab on the air filter and remove it as shown.
6. Gently tap both sides of the air filter against a hard surface
four or five times to remove loose dust from the air filter.
Note: Do not tap the filter too hard. This can cause it to bend
or break.
7. Use a small vacuum cleaner that is designed for computers
and other office equipment to remove any remaining dust
from the surface of the filter. If you don’t have one, gently
clean the filter using a very soft brush (such as a clean
artist’s paintbrush).
If the dirt is difficult to remove or the filter is broken,
replace it. You can purchase air filter part number
V13H134A28 from an authorized Epson reseller. To find
the nearest reseller, please call 800-GO-EPSON
(800-463-7766). To purchase online, visit
www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).
8. Insert the air filter as shown.
9. Reattach the air filter cover by inserting the tabs as shown and pressing the cover against
the projector until it clicks into place.