48 Using HDMI Link
Using HDMI Link
When you connect HDMI CEC-compatible devices to the projector with HDMI cables, you
can control them using the HDMI Link buttons on the projector’s remote control. This lets
you use just one remote control to operate many commonly used features on all your devices.
In a typical configuration, your DVD player may be connected to the projector through an
amplifier or home theater system. Even if the amplifier does not conform to the HDMI CEC
standard, you can still use the projector’s HDMI Link buttons to operate the DVD player as
long as the DVD player conforms to the HDMI CEC standard.
Note: Some HDMI CEC functions may not operate, depending on the connected product’s design
and compliance with the HDMI CEC standard.

Setting Up HDMI Link

To prepare your devices to work with the HDMI Link buttons, follow these steps:
1. Press the
HDMI Link
button on the projector’s remote control.
2. Select
HDMI Link
and set it to
On
.
3. Set up your connected devices so their HDMI CEC-compatible functions are enabled.
For details, refer to the manufacturer’s documentation.
Amplifier DVD player
HDMI cable HDMI cable