Windows-Specific Operating System Features Windows Vista Notes:
1) The “Roll Paper Pause” feature is not available in Vista. If
required, contact Technical Support.
2) This system supports both 32-bit and 64-bit Vista.
Windows 2000/XP Notes:
3) Paper Type Control – Select Cut Sheet, Roll, or Perforated Roll.
This modifies the printable area of all paper sizes (Letter, Legal,
A4, and Custom).
4) Using Custom Forms
a. Select Start:Settings:Printers: select Server Properties.
b. On the Forms Page, create a form for use with custom
paper size.
c. Allowed sizes:
• Minimum width = 4” (10.2 cm)
• Maximum width = 8.5” (21.6 cm)
• Minimum height = 2.00 “ (5.1 cm)
• Maximum height = 65,535 print lines.
d. All forms created within these specifications will be
displayed as paper size options.
Windows CE Notes:
1) Port Buffer Size – Controls the largest block of data sent to the
printer port at one time. Set this to the largest value that works
reliably on your CE device (larger=faster).
2) Perforated Paper – Modifies the printable area to assure proper
function when using perforated paper.
3) Display This Dialog When Printing – If “on”, settings may be
changed for every print job. To be sure the same settings are
always used, set this to “off.” It may be turned “on” again using
the Control Panel.