allow you to print more characters across a line than larger
characters (10 per inch). Each character in ‘10’, ‘12’, or ‘15’ per
inch mode will use the same amount of horizontal space. If
‘Proportional’ is selected, each character uses an amount of
horizontal space appropriate to the characters’ intrinsic width.
For example, the letter ‘i’ will occupy less horizontal space
than the letter ‘w’. The value supplied here will, as noted
above, affect the actual width of margin settings.
Extended Characters:
This command determines what the printer’s ESC/P®
emulation does when ASCII characters with values of between
128 and 255 are received. Either the graphics characters or
italic versions of the lower valued characters (32 to 127) are
printed. See chart in Appendix I.
Character Set Map:
This menu allows you to select the use of special characters
appropriate for one of the languages selected. See Appendix I
for a chart of the special characters available.