CD/DVD:

12-cm (4.72") CD/DVD (Standard)

12-cm (4.72") CD/DVD (Wide)

 

45 mm

 

25.5 mm

 

116 mm

 

116 mm

Inner diameter

Outer diameter

Inner diameter

Outer diameter

45 mm (1.77")

116 mm (4.57")

25.5 mm (1.00")

116 mm (4.57")

cCaution:

❏Make sure to set the inner diameter and the outer diameter within the areas shown above. Printing on sections outside the printable area may damage your CD/DVD drive.

❏The EPSON Total Disc Maker can set between an inner diameter of 18 mm and an outer diameter of 119.4 mm (0.71 to 4.70"). However, printing outside the printable area (45 to 116 mm) may result in sticking, staining of the disc tray, peeling of print, and blurring of print. It is recommended to check the disc type before using.

❏When printing outside the printable area (ink absorbing layer) of the disc occurs, the ink printed outside the printable area does not fix. Check the label of the printable area of the disc being used before setting.

❏Precautions for setting the printable area

-Make sure the printable area set does not exceed the printable area of the actual disc being used.

-Check whether coloration of print made on the rib (stack ring) is not uniform.

-Printing on the rib (stack ring) may cause ink sticking, disc sticking, and ink erasure after printing.

❏Measures to be taken when printing outside printable area:

When printing inside the inner diameter results in ink sticking, disc sticking, and ink erasure, take the following action to avoid that.

-Set Drying Time on the printer driver’s printer settings screen and print. Although throughput may be reduced, problems will be avoided or reduced, since the disc will be ejected after a set time.

-Enable Publish after Mask Rib Area. If you print from another application, set from the user-defined label setting in the printer driver. If you print from the Total Disc Maker, set from Set Inner/Outer Diameter setting.

Product Information 119