Epson 310N, 510DN Transporting Your Printer

Maintaining Your Printer 136
2. Make sure that READY appears on the LCD screen, and then press the rRight button.
MENU appears on the LCD screen.
3. Press the dDown or uUp button to select MAINTENANCE, and then press the OK or
rRight button.
4. Press the dDown or uUp button to select CLEANING SHEET, and then press the OK or
rRight button.
5. Press the OK button. The printer feeds and ejects paper.
Repeat these steps until no ink gets on the paper.
Transporting Your Printer
If you need to transport your printer some distance, carefully prepare and repack it as
described below. Use the original box and packing materials, or a similar box that holds the
printer snugly.
cCaution:
When transporting the printer, do not tilt it, stand it up vertically, or turn it upside down.
Otherwise, ink may leak inside the printer.
1. Plug in the printer and turn it on. Wait until the print head returns to the home position.
2. Press the P Power button to turn off the printer, then unplug its power cord.
cCaution:
Do not unplug the power cord while the print head is moving or the print head will not
return to the home position.
3. Disconnect the interface cable.
4. Remove all paper from the printer.
5. Confirm that the cartridge lever is in the locked position and the cartridge cover is
closed.
cCaution:
Leave the ink cartridges and maintenance box installed to prevent the ink from leaking.
Note:
If you’re using the Extra High Capacity Ink Cartridge, install a standard- or high-capacity
cartridge instead when you transport the printer.
6. Close the output tray and paper support.