If your computer can’t send the print job successfully, you may see a communication error window on your screen. Click the Stop button, then try the following:
■Make sure the printer cable is connected securely and that the cable meets the system requirements on page 43 or page 44. If the cable doesn’t meet the specifications or is inoperable, try a different cable.
■The printer may not be receiving power. Make sure it is plugged in securely and that the electrical outlet is operable and not controlled by a wall switch or timer. If in doubt, try another outlet.
■Make sure you installed the printer software and both ink cartridges as described on the Start Here sheet. Also check that your printer is selected in your application, or as the Windows default printer or the current printer in the Macintosh Chooser.
■If you’re printing on a network, you need to set up your printer for network printing as described in your electronic Reference Guide.
The printer sounds as though it is printing, but nothing prints.You may need to clean the print head as described on page 20. If that doesn’t work, try installing a new ink cartridge; see page 28 for instructions.
You see a General or Unknown error window on your screen.Unplug your printer, make sure no packing material is left inside it, and then plug it back in and try to print. If you still see the error window, contact your dealer or EPSON; see page 41 for contact information.
Printing is too slow.Make sure your system meets the requirements listed on page 43 or page 44. If you’re printing a
34